If you have a problem or need to report a bug please email : support@dsprobotics.com
There are 3 sections to this support area:
DOWNLOADS: access to product manuals, support files and drivers
HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects
USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here
NEW REGISTRATIONS - please contact us if you wish to register on the forum
Knobman issue
16 posts
• Page 1 of 2 • 1, 2
Knobman issue
Ok, to add on to the unending list of questions i have (sorry) this one just might be the most annoying.
Ok...so i downloaded Knobman and loaded up some of bryntes knobs, everything was working fine until it i loaded them into FS and realized the knobs were not rotating.
I went inside the ruby code and changed the (@startangle) to =0, and the (@sweepangle) to =360 but nothing seems to work. Also i am replacing the stock knob bitmap. All i get is a small pointer on the knob that spins which isn't even apart of the knob itself.
This is frustrating because this limits the knobs i have available for the GUI.
Ok...so i downloaded Knobman and loaded up some of bryntes knobs, everything was working fine until it i loaded them into FS and realized the knobs were not rotating.
I went inside the ruby code and changed the (@startangle) to =0, and the (@sweepangle) to =360 but nothing seems to work. Also i am replacing the stock knob bitmap. All i get is a small pointer on the knob that spins which isn't even apart of the knob itself.
This is frustrating because this limits the knobs i have available for the GUI.
- Nickateenbeats
- Posts: 37
- Joined: Tue Jul 24, 2018 11:32 pm
Re: Knobman issue
post an example of the Knob schematic so we don't have to guess.
- RJHollins
- Posts: 1568
- Joined: Thu Mar 08, 2012 7:58 pm
Re: Knobman issue
I tried, but i get a "Sorry, the board attachment quota has been reached." error.
- Nickateenbeats
- Posts: 37
- Joined: Tue Jul 24, 2018 11:32 pm
Re: Knobman issue
Nickateenbeats wrote:I tried, but i get a "Sorry, the board attachment quota has been reached." error.
I've emailed Malc about this message.
In the meantime we have to use Dropbox or similar and post a link.
Cheers
Spogg
-
Spogg - Posts: 3324
- Joined: Thu Nov 20, 2014 4:24 pm
- Location: Birmingham, England
Re: Knobman issue
That's great to hear! I have posted a link to the module below:
http://www.mediafire.com/file/j1eja4qbt ... +issue.zip
http://www.mediafire.com/file/j1eja4qbt ... +issue.zip
- Nickateenbeats
- Posts: 37
- Joined: Tue Jul 24, 2018 11:32 pm
Re: Knobman issue
Heya Nickateen,
The issue u r having is because the knob is a single frame.
For the Ruby knob to work- u need a knobstrip,
which is say 51 frames stitched together in a long strip.
Should work then.
The knobstrip can be exported from KM
-This file server is shady too, there was an attack on me from it
The issue u r having is because the knob is a single frame.
For the Ruby knob to work- u need a knobstrip,
which is say 51 frames stitched together in a long strip.
Should work then.
The knobstrip can be exported from KM
-This file server is shady too, there was an attack on me from it
-
nix - Posts: 817
- Joined: Tue Jul 13, 2010 10:51 am
Re: Knobman issue
Hey Nix, thanks for the reply! And really? I been using it for years with no problems (not yet atleast).
What kind of attack? Also, as for the knob...I always export the knob as a animation, so i need to start exporting as a stitched frame...correct?
One more thing, is png the only way to make the knob transparent?
What kind of attack? Also, as for the knob...I always export the knob as a animation, so i need to start exporting as a stitched frame...correct?
One more thing, is png the only way to make the knob transparent?
- Nickateenbeats
- Posts: 37
- Joined: Tue Jul 24, 2018 11:32 pm
Re: Knobman issue
Nick what problem do u have?
I mean for me all knobs works without any problems.
Try not using ruby knobs mybe?
I mean for me all knobs works without any problems.
Try not using ruby knobs mybe?
- djbrynte
- Posts: 612
- Joined: Mon Jun 22, 2009 10:51 am
- Location: Stockholm, Sweden
Re: Knobman issue
Hey brynte, so basically...I'm exporting the knobs as a PNG animation file and loading them into FS (im replacing the FS "static" knob and loading the PNG file in it's place) however, the knob has no rotation.
- Nickateenbeats
- Posts: 37
- Joined: Tue Jul 24, 2018 11:32 pm
Re: Knobman issue
i suggest removed the knobs u have and use other FS knobs.
- djbrynte
- Posts: 612
- Joined: Mon Jun 22, 2009 10:51 am
- Location: Stockholm, Sweden
16 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 47 guests