If you have a problem or need to report a bug please email : support@dsprobotics.com
There are 3 sections to this support area:
DOWNLOADS: access to product manuals, support files and drivers
HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects
USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here
NEW REGISTRATIONS - please contact us if you wish to register on the forum
Storage Oscilloscope (FS v3.06)
3 posts
• Page 1 of 1
Storage Oscilloscope (FS v3.06)
Updated: 04/18/2020
Storage Oscilloscope
ORIGINAL REFERENCE URL:
viewtopic.php?f=11&t=1136
Post Title: Oscilloscope
Original Filename: scope new1.fsm
==========
This my *.fsm schematic modified version of same ...
The Storage Oscope w/additional files can be downloaded as a ZIP File from the following link:
https://www.invntefx.com/ssl/_invntefxfstone/stoscopefx.zip
==========
The Storage Oscope has the capability of
displaying an input waveform with these additional features:
Time Control:
Timeline speed is adjustable from 1 ms (10 Khz) to 1 sec (1 Hz) and includes a Fine Tuner.
Gain Control:
Gain is adjustable from 1x to 10x.
By pressing the "Store" button (red/blue led turns on and changes from red to blue) the waveform is stopped/stored temporarily in the oscope memory until the button is pressed again (turned off).
There are 3 modes of view:
1. Continuous (waveform is displayed 'live')
2. Trigger ve+ (voltage 'positive')... crosshairs will auto-select nearest cross-section V+ voltage reference point.
3. Trigger ve- (voltage 'negative') ... crosshairs will auto-select nearest cross-section V- voltage reference point.
NOTE:
In triggered modes crosshairs appear and can be adjusted. red/blue LED will light intermittently.
When the "Store" button is pressed it will remain on (blue).
Pre-Trigger adjusts 'Timeline' position of vertical crosshair (along horizontal axis).
Trigger adjusts the 'Gain' position of horizontal dotted-crosshair (along the vertical axis).
Footnote: Description of electronic terms ve+ & ve-
ve+(voltage 'positive' with respects to V+ 'ground' reference point)
ve-(voltage 'negative' with respects to V- 'ground' reference point)
... these are the 'starting positions' for the trigger activated crosshairs.
've' is a simple shorthand (last 2 alphabetical letters) version of either term positive or negative and refers to ground.
+ or - is simply the 'polarity' term.
Storage Oscilloscope
ORIGINAL REFERENCE URL:
viewtopic.php?f=11&t=1136
Post Title: Oscilloscope
Original Filename: scope new1.fsm
==========
This my *.fsm schematic modified version of same ...
The Storage Oscope w/additional files can be downloaded as a ZIP File from the following link:
https://www.invntefx.com/ssl/_invntefxfstone/stoscopefx.zip
==========
The Storage Oscope has the capability of
displaying an input waveform with these additional features:
Time Control:
Timeline speed is adjustable from 1 ms (10 Khz) to 1 sec (1 Hz) and includes a Fine Tuner.
Gain Control:
Gain is adjustable from 1x to 10x.
By pressing the "Store" button (red/blue led turns on and changes from red to blue) the waveform is stopped/stored temporarily in the oscope memory until the button is pressed again (turned off).
There are 3 modes of view:
1. Continuous (waveform is displayed 'live')
2. Trigger ve+ (voltage 'positive')... crosshairs will auto-select nearest cross-section V+ voltage reference point.
3. Trigger ve- (voltage 'negative') ... crosshairs will auto-select nearest cross-section V- voltage reference point.
NOTE:
In triggered modes crosshairs appear and can be adjusted. red/blue LED will light intermittently.
When the "Store" button is pressed it will remain on (blue).
Pre-Trigger adjusts 'Timeline' position of vertical crosshair (along horizontal axis).
Trigger adjusts the 'Gain' position of horizontal dotted-crosshair (along the vertical axis).
Footnote: Description of electronic terms ve+ & ve-
ve+(voltage 'positive' with respects to V+ 'ground' reference point)
ve-(voltage 'negative' with respects to V- 'ground' reference point)
... these are the 'starting positions' for the trigger activated crosshairs.
've' is a simple shorthand (last 2 alphabetical letters) version of either term positive or negative and refers to ground.
+ or - is simply the 'polarity' term.
- Attachments
-
- stoscopefx1.jpg (55.18 KiB) Viewed 3629 times
Last edited by pwesynthmaker on Wed Nov 24, 2021 6:47 pm, edited 8 times in total.
https://www.invntefx.com/ssl/_invntefxf ... fstone.htm
Inventor eFX Technology FlowStone WebPage
https://www.invntefx.com/
Inventor eFX Technology
LOGIN
Username: viewer
Password: A#1viewer
Inventor eFX Technology FlowStone WebPage
https://www.invntefx.com/
Inventor eFX Technology
LOGIN
Username: viewer
Password: A#1viewer
-
pwesynthmaker - Posts: 71
- Joined: Fri Feb 12, 2016 7:18 pm
Re: Storage Oscilloscope (FS v3.06)
Very useful, thanks!
- adamszabo
- Posts: 657
- Joined: Sun Jul 11, 2010 7:21 am
Re: Storage Oscilloscope (FS v3.06)
04/18/2020
Updated Version in first post.
Updated Version in first post.
https://www.invntefx.com/ssl/_invntefxf ... fstone.htm
Inventor eFX Technology FlowStone WebPage
https://www.invntefx.com/
Inventor eFX Technology
LOGIN
Username: viewer
Password: A#1viewer
Inventor eFX Technology FlowStone WebPage
https://www.invntefx.com/
Inventor eFX Technology
LOGIN
Username: viewer
Password: A#1viewer
-
pwesynthmaker - Posts: 71
- Joined: Fri Feb 12, 2016 7:18 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 31 guests