X10 Home Automation Lamp Test
Posted: Thu Nov 17, 2011 9:10 pmIn this example FlowStone sends out the X10 commands to the Marmitek CM15 Pro USB X10 Controller to turn a simple lamp on and off from a switch on screen.
The lamp address is set to A1
X10 Commands used are:
A1 on
A1 off
Simple!
You will also need the Active Home SDK installed:
- cm15__57745_zoom.jpg (59.37 KiB) Viewed 30090 times
The lamp address is set to A1
X10 Commands used are:
A1 on
A1 off
Simple!
- x10 Lamp Test clip.png (25.13 KiB) Viewed 30090 times
You will also need the Active Home SDK installed:
ahsdk_install.zip- (7.42 MiB) Downloaded 3007 times