If you have a problem or need to report a bug please email :

There are 3 sections to this support area:

DOWNLOADS: access to product manuals, support files and drivers

HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects

USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here

devantech sd84 servo controller

Discuss robotics applications using FlowStone here

devantech sd84 servo controller

Postby Cadburyceme » Thu Jan 05, 2012 1:17 am

How can i use flowstone to program that kind of Servo controller if i can i will buy pro version but i'm a little confused right now and there are so many software developers in the world. i can't buy the ssc-32 because it's a project for the university and they provided us such thing. buy they allow us buy any kind of software solution with their budget...

so i'm waiting your response :)
Posts: 1
Joined: Wed Jan 04, 2012 7:43 pm

Re: devantech sd84 servo controller

Postby Embedded » Sat Jan 07, 2012 1:59 am

I had a quick look at the data sheet.

This it a basic serial com port protocol, so you can use it straight away from flowstone without any hard coding.

There are lot's of examples for similar devices in the FlowStone examples area, here are a few to get you going:

The data in your case is in Hex so remember to set the hex input on the com port module to true!


To set ch1 to 1500uS (Center the servo) The command format is:

Sync1 = 0xAA
Sync2 = 0xA0
Sync3 =0x55
Command = 0x01
First Channel = 0x01
Byte Count = 0x02
Low Byte = 0xDC
High Byte = 0x05

So literally send out:

Posts: 144
Joined: Sat Oct 30, 2010 1:42 pm

Return to Robotics

Who is online

Users browsing this forum: No registered users and 1 guest