Support

If you have a problem or need to report a bug please email : support@dsprobotics.com

There are 3 sections to this support area:

DOWNLOADS: access to product manuals, support files and drivers

HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects

USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here

NEW REGISTRATIONS - please contact us if you wish to register on the forum

Yost Engineering Servo Center Test

Yost Engineering Servo Center Test

Postby admin » Thu Nov 17, 2011 8:21 pm

In this example we control a single servo (S0) on the Yost Engineering Servo Center board.

Servo CenterLR.png
Servo CenterLR.png (229.24 KiB) Viewed 30348 times


In this case we are using the USB virtual Comport driver supplied with the board. We have set up the Com port to be Com 8.

There are two ways of communicating with the Servo Center via ASCII or Via HEX so we have made two example one for each.

ServoCenter ASCII clip.png
ServoCenter ASCII clip.png (42.83 KiB) Viewed 30348 times


More information visit: http://tech.yostengineering.com/servoFolder
Attachments
ServoCenter ASCII.fsm
(9.55 KiB) Downloaded 2844 times
ServoCenter HEX.fsm
(9.43 KiB) Downloaded 2853 times
User avatar
admin
Site Admin
 
Posts: 231
Joined: Tue May 11, 2010 6:30 pm

Return to Yost Engineering

Who is online

Users browsing this forum: No registered users and 1 guest