Time limits for demo's

by **Jay** » Sun Jun 09, 2013 8:17 am

well a cracker or reverse engineer will spend as much time as it takes to get the result they require! and they do! its just a fact nowadays that most reverse's look for time bombs as it became so common for devs to use them!

when a team decide to reverse a piece of software they usually go through it with a very fine tooth comb, they don't just switch off the serial checks and go hey presto its cracked, far far from it RJH, if the coder is any good at all they will check every eventuality within the code and make sure they cover all the bases and quite often they even fix bugs within apps that were not noticed or fixed by the developer and the reverse's really enjoy publishing details of bug fixes they implement, this happens with most of the native instruments gear! and some versions of cracked kontakt have added features that were not made by NI but by the crack teams!

but yes sometimes inferior teams miss something and release a half crack but then other teams come along and fix that out usually within hours then gloat about it within the scene, hence you see the same software released by many teams all within hours of each other! its like a big competition between them!

remember these people don't crack software for p2pers to fill their boots and they are a very different species from music cd and movie pirates although you might get some completely uneducated shills come in and tell you different! its all about challenges, l33tism and sometimes with certain crack teams its about killing what they see as invasive protection methods!

some devs in the past have simply asked the crackers to stop cracking their apps and the teams have obliged and even went as far as giving advise on good protection! lol protection racketeering :lol:

online/ off board computing seems to be the thing nowadays, the next photoshop is to be a cloud app so adobe are saying, to beat piracy! but you could try using a mixture of hardware ids, serial, and online authorization and see how it goes!

hide the authorization data within a wave file header or image file or even within a wave/mp3 file! (Steganography)

there is lots of things you could do to buy time to make sales before being raped and pillaged, another observation i have made over the last number of years is lots of folk claiming that they made no money because they got cracked when in reality it was because the software they were peddling was no better than readily available freeware

so make something intuitive and individual or with unique features or sound, "but mine looks great as opposed to that freeware" does not cut it, most musicians couldn't give a flying fig what it looks like but concentrate on how it sounds or handles!

regards

by **nix** » Sun Jun 09, 2013 9:54 am

I think it does matter how it looks.
I am a visual artist too,
and can't handle eyesores.
It doesn't have to be a work of art-
but if a plug doesn't fit my aesthetic,
I won't use it.
For example if FL changed it's name and allowed skinning it would be no2 DAW.
I don't mind simplicity, but some stuff doesn't make the graphical cut for being inharmonious/unpleasing 2 me eye.

I won't challenge crack teams.
My plugs aren't worth trying to implement anything atm. I f I felt I had something-I dunno.
If I did, I would have no saving- ie. no preset manager.
Then the crack would have to be a bought copy-
which can be watermarked.
I would blacklist the purchaser.

I personally don't use cracks for more than ethical reasons.
I'd like my systems to function & my data reasonably secure.

by **RJHollins** » Sun Jun 09, 2013 10:01 am

ya know ... maybe I've been going about this all the wrong way.

What if I laid out the specification for the app that I need .... and let the hackers program it ! :shock:

You know ... get rid of the 'middle man' ......... ME

So let me get this right ... let's suppose we knew how to code some type of time bomb. By that, I'm referring to a delayed disabling of the app. Let suppose some crazy delay time, like one month .... or maybe 3 if you like.

HOW would they even know that:

1. that a TB even exists ... even if they pre suppose it does.
2. what would 'identify' a TB different from the rest of the code.
and
3. how in the world would they know they caught everything.

I'm not expecting any real answers ... but if you want to have a laugh ... go back with a search on this topic, oh quite a few years ago ... same reactions and response ... maybe some people don't want to envision their hero having to work up a sweat :lol:

... the clouds are moving in, pc sales are dropping even as the price does ... tablets are overtaking [funny, no hard drive storage ... but web access. Maybe we should do a community project ... you know, something that could be an app, but no one is quite sure what it is till it's cracked.

All said and done ... if I decide to release another app ... it may be by 'invitation only'. WITH CONDITIONS. Back in the day, personal names were embedded and displayed... straight from the credit card. OH, maybe not exactly like the old days ... in the meantime ... let's get this thread back on topic before 'Drnkhobo' comes back in and yells at us again !!! :oops:

by **nix** » Sun Jun 09, 2013 10:15 am

It's been stated that it's not very hard to decompile an .fsm,
so they can go over all the lines, undoing my watermark thing,
and maybe finding the time delayed crippler too.

More OT, sorry-
but talking about phones and tablets-
we need an .exe wrapper? hmm

by **RJHollins** » Sun Jun 09, 2013 6:43 pm

I thought I read differently regarding 'what' could be exactly seen via a decompiler of SM or FSM dll's.

For my own education, maybe there is a decompiler recommended [preferably free], that at least I could see what it would show ? Might answer some question ...

by **Drnkhobo** » Sun Jun 09, 2013 10:41 pm

in the meantime ... let's get this thread back on topic before 'Drnkhobo' comes back in and yells at us again !!!

So been doing some digging and found this app PE Explorer. Its the only one I found to decompile and de-assemble.

The results are weird (cause i dont understand it) but in the decompiled "view" you can select "string display". This is what comes from a exported vst with nothing more than a stereo amp inside. . . .

Code: Select all: SSZ103969E0__RubyEditE: db '_RubyEditE',0 Align 4 SSZ103969EC_Splitter: db 'Splitter',0 Align 4 SSZ103969F8_DSInSelect: db 'DSInSelect',0 Align 4 SSZ10396A04_Number_of_Direct_Sound_In_device: db 'Number of Direct Sound In devices',0 Align 4 SSZ10396A28_DSInDevs: db 'DSInDevs',0 Align 4 SSZ10396A34_TriggerSwitch: db 'TriggerSwitch',0 Align 4 SSZ10396A44_change: db 'change',0 Align 4 SSZ10396A4C_Changed: db 'Changed',0 SSZ10396A54_Exe_background_colour: db 'Exe background colour',0 Align 4 SSZ10396A6C_BackCol: db 'BackCol',0 L10396A74: db 3Dh; '=' db 00h; db 00h; db 00h; SSZ10396A78_The_brightness_level_in_LUX: db 'The brightness level in LUX',0 SSZ10396A94_NetvoxLight: db 'NetvoxLight',0 SSZ10396AA0_Fault: db 'Fault',0 Align 4 SSZ10396AA8_Whether_there_has_been_a_fault: db 'Whether there has been a fault',0 Align 4 SSZ10396AC8_Tamper: db 'Tamper',0 Align 4 SSZ10396AD0_Whether_the_device_has_been_tamp: db 'Whether the device has been tampered with',0 Align 4 SSZ10396AFC_Alarm: db 'Alarm',0 Align 4 SSZ10396B04_Whether_the_alarm_has_been_trigg: db 'Whether the alarm has been triggered',0 Align 4 SSZ10396B2C_The_current_heartbeat_period_in_: db 'The current heartbeat period in seconds',0 SSZ10396B54_Type_of_alarm_security_device: db 'Type of alarm security device',0 Align 4 SSZ10396B74_Heart: db 'Heart',0 Align 4 SSZ10396B7C_Set_the_heartbeat_period_in_seco: db 'Set the heartbeat period in seconds',0 SSZ10396BA0_NetvoxAlarm: db 'NetvoxAlarm',0 L10396BAC: db 55h; 'U' db 56h; 'V' db 00h; db 00h; SSZ10396BB0_The_UV_reading__if_supported_by_: db 'The UV reading (if supported by the device)',0 SSZ10396BDC_Humid: db 'Humid',0 Align 4 SSZ10396BE4_The_percentage_humidity: db 'The percentage humidity',0 SSZ10396BFC_The_temperature_in_degrees_celci: db 'The temperature in degrees celcius',0 Align 4 SSZ10396C20_Change: db 'Change',0 Align 4 SSZ10396C28_The_reportable_change: db 'The reportable change',0 Align 4 SSZ10396C40_Rmax: db 'Rmax',0 Align 4 SSZ10396C48_The_maximum_time_reporting_inter: db 'The maximum time reporting interval (secs)',0 Align 4 SSZ10396C74_Rmin: db 'Rmin',0 Align 4 SSZ10396C7C_The_minimum_time_reporting_inter: db 'The minimum time reporting interval (secs)',0 Align 4 SSZ10396CA8_NetvoxTemp: db 'NetvoxTemp',0 Align 4 SSZ10396CB4_Energy: db 'Energy',0 Align 4 SSZ10396CBC_The_energy_usage_through_the_out: db 'The energy usage through the outlet (kWh)',0 Align 4 SSZ10396CE8_Power: db 'Power',0 Align 4 SSZ10396CF0_The_power_usage_through_the_outl: db 'The power usage through the outlet (W)',0 Align 4 SSZ10396D18_The_voltage_usage_through_the_ou: db 'The voltage usage through the outlet (V)',0 Align 4 SSZ10396D44_The_current_usage_through_the_ou: db 'The current usage through the outlet (mA)',0 Align 4 SSZ10396D70_Whether_the_device_is_on_or_off: db 'Whether the device is on or off',0 SSZ10396D90_Battery: db 'Battery',0 SSZ10396D98_The_percentage_battery_level___1: db 'The percentage battery level (-1 if this could not be read)',0 SSZ10396DD4_State_of_the_device: db 'State of the device',0 SSZ10396DE8_Switch_the_power_outlet_on: db 'Switch the power outlet on',0 Align 4 SSZ10396E04_Switch_the_power_outlet_on_or_of: db 'Switch the power outlet on or off',0 Align 4 L10396E28: dd 40833333h SSZ10396E2C_Query: db 'Query',0 Align 4 SSZ10396E34_Query_the_device_state: db 'Query the device state',0 Align 4 SSZ10396E4C_Starts_communications_with_the_d: db 'Starts communications with the device',0 Align 4 L10396E74: db 49h; 'I' db 64h; 'd' db 00h; db 00h; SSZ10396E78_IEEE_Address_id_of_the_device_yo: db 'IEEE Address id of the device you want to connect to',0 Align 4 SSZ10396EB0_NetvoxPower: db 'NetvoxPower',0 SSZ10396EBC_Reports_the_state_of_the_Netvox_: db 'Reports the state of the Netvox adapter',0 Align 8 SSZ10396EE8_The_baud_rate_at_which_you_want_: db 'The baud rate at which you want to operates in bps (default 115200)',0 SSZ10396F2C_Starts_communications_with_the_a: db 'Starts communications with the adapter',0 Align 4 SSZ10396F54_NetvoxUSB: db 'NetvoxUSB',0 Align 4 SSZ10396F60_A_frame_of_samples: db 'A frame of samples',0 Align 4 SSZ10396F74_Samples: db 'Samples',0 SSZ10396F7C_The_number_of_samples_you_want_t: db 'The number of samples you want to grab',0 Align 4 SSZ10396FA4_Mono_data: db 'Mono data',0 Align 4 SSZ10396FB0_MonoToFrame: db 'MonoToFrame',0 Align 8 SSZ10396FC0_An_event_with_the_size_of_the_fr: db 'An event with the size of the frame (sent precisely before the frame is processed)',0 Align 4 SSZ10397014_ToFrame: db 'ToFrame',0 SSZ1039701C_ToMono: db 'ToMono',0 Align 4 SSZ10397024_The_amp_reading_for_the_chosen_d: db 'The amp reading for the chosen device',0 Align 4 SSZ1039704C_Readings: db 'Readings',0 Align 4 SSZ10397058_Corresponding_Amp_readings_for_a: db 'Corresponding Amp readings for all devices found',0 Align 4 SSZ1039708C_Devices: db 'Devices',0 SSZ10397094_IDs_of_all_devices_found_when_re: db 'IDs of all devices found when reading',0 Align 4 SSZ103970BC_Reports_the_state_of_the_OWL: db 'Reports the state of the OWL',0 Align 4 SSZ103970DC_Whether_connection_was_successfu: db 'Whether connection was successful',0 Align 4 SSZ10397100_Selected_Device: db 'Selected Device',0 SSZ10397110_ID_of_the_device_you_want_to_rea: db 'ID of the device you want to read (defaults to first found)',0 Align 8 SSZ10397150_Reads_data_from_connected_device: db 'Reads data from connected devices (note can take a few moments to do the initial read)',0 Align 4 SSZ103971A8_Starts_communications_with_the_O: db 'Starts communications with the OWL',0 Align 4 L103971CC: db 4Fh; 'O' db 57h; 'W' db 4Ch; 'L' db 00h; SSZ103971D0_Analog_input_7__Pin_15_: db 'Analog input 7 (Pin 15)',0 SSZ103971E8_Analog_input_6__Pin_13_: db 'Analog input 6 (Pin 13)',0 SSZ10397200_Analog_input_5__Pin_11_: db 'Analog input 5 (Pin 11)',0 SSZ10397218_Analog_input_4__Pin_9_: db 'Analog input 4 (Pin 9)',0 Align 4 SSZ10397230_Analog_input_3__Pin_7_: db 'Analog input 3 (Pin 7)',0 Align 4 SSZ10397248_Analog_input_2__Pin_5_: db 'Analog input 2 (Pin 5)',0 Align 4 SSZ10397260_Analog_input_1__Pin_3_: db 'Analog input 1 (Pin 3)',0 Align 4 SSZ10397278_Analog_input_0__Pin_1_: db 'Analog input 0 (Pin 1)',0 Align 4 L10397290: db 44h; 'D' db 37h; '7' db 00h; db 00h; SSZ10397294_Digital_I_O_7__Pin_35_: db 'Digital I/O 7 (Pin 35)',0 Align 4 L103972AC: db 44h; 'D' db 36h; '6' db 00h; db 00h; SSZ103972B0_Digital_I_O_6__Pin_33_: db 'Digital I/O 6 (Pin 33)',0 Align 4 L103972C8: db 44h; 'D' db 35h; '5' db 00h; db 00h; SSZ103972CC_Digital_I_O_5__Pin_31_: db 'Digital I/O 5 (Pin 31)',0 Align 4 L103972E4: db 44h; 'D' db 34h; '4' db 00h; db 00h; SSZ103972E8_Digital_I_O_4__Pin_29_: db 'Digital I/O 4 (Pin 29)',0 Align 4 L10397300: db 44h; 'D' db 33h; '3' db 00h; db 00h; SSZ10397304_Digital_I_O_3__Pin_27_: db 'Digital I/O 3 (Pin 27)',0 Align 4 L1039731C: db 44h; 'D' db 32h; '2' db 00h; db 00h; SSZ10397320_Digital_I_O_2__Pin_25_: db 'Digital I/O 2 (Pin 25)',0 Align 4 L10397338: db 44h; 'D' db 31h; '1' db 00h; db 00h; SSZ1039733C_Digital_I_O_1__Pin_23_: db 'Digital I/O 1 (Pin 23)',0 Align 4 L10397354: db 44h; 'D' db 30h; '0' db 00h; db 00h; SSZ10397358_MC_1608FS: db 'MC-1608FS',0 Align 4 SSZ10397364_Bridge_value_at_input_3: db 'Bridge value at input 3',0 SSZ1039737C_Bridge_value_at_input_2: db 'Bridge value at input 2',0 SSZ10397394_Bridge_value_at_input_1: db 'Bridge value at input 1',0 SSZ103973AC_Bridge_value_at_input_0: db 'Bridge value at input 0',0 Align 8 SSZ103973C8_Set_the_gain_for_input_3__1_8_16: db 'Set the gain for input 3 (1,8,16,32,64 or 128 - will be rounded to nearest)',0 Align 8 SSZ10397418_Set_the_gain_for_input_2__1_8_16: db 'Set the gain for input 2 (1,8,16,32,64 or 128 - will be rounded to nearest)',0 Align 8 SSZ10397468_Set_the_gain_for_input_1__1_8_16: db 'Set the gain for input 1 (1,8,16,32,64 or 128 - will be rounded to nearest)',0 Align 8 SSZ103974B8_Set_the_gain_for_input_0__1_8_16: db 'Set the gain for input 0 (1,8,16,32,64 or 128 - will be rounded to nearest)',0 SSZ10397504_Enable_input_0: db 'Enable input 0',0 db 00h; db 00h; db 00h; db 00h; db 00h; SSZ10397518_Sply&f=2&sid=c9ea26b3df4c1304a271 db 'Sets the data rate in milliseconds for ALL inputs (8-1000, will be rounded to multiple of 8)',0 Align 4 SSZ10397578_Phidgets_Bridge: db 'Phidgets Bridge',0 SSZ10397588_set_the_voltage_for_output_3____: db 'set the voltage for output 3 (+/-10V)',0 Align 4 SSZ103975B0_Enable_output_3: db 'Enable output 3',0 SSZ103975C0_set_the_voltage_for_output_2____: db 'set the voltage for output 2 (+/-10V)',0 Align 4 SSZ103975E8_Enable_output_2: db 'Enable output 2',0 SSZ103975F8_set_the_voltage_for_output_1____: db 'set the voltage for output 1 (+/-10V)',0 Align 4 SSZ10397620_Enable_output_1: db 'Enable output 1',0 SSZ10397630_Volts: db 'Volts',0 Align 4 SSZ10397638_set_the_voltage_for_output_0____: db 'set the voltage for output 0 (+/-10V)',0 Align 4 SSZ10397660_Enable_output_0: db 'Enable output 0',0 SSZ10397670_Phidgets_Analog: db 'Phidgets Analog',0 SSZ10397680_Total_time_that_has_passed_since: db 'Total time that has passed since the last reset in microseconds',0 SSZ103976C0_Total_number_of_counted_events: db 'Total number of counted events',0 Align 4 SSZ103976E0_The_measured_frequency_in_Hz: db 'The measured frequency in Hz',0 Align 4 SSZ10397700______1: db ' 1',0 Align 4 SSZ10397708_Reset_the_counter: db 'Reset the counter',0 Align 4 SSZ1039771C_Timeout: db 'Timeout',0 SSZ10397724_Timeout_value_for_the_input_in_m: db 'Timeout value for the input in microseconds (default=1000)',0 Align 4 SSZ10397760_0_zero_crossing__1_logic_level: db '0=zero crossing, 1=logic level',0 Align 4 SSZ10397780_Enable: db 'Enable',0 Align 4 SSZ10397788_Whether_to_enable_the_channel: db 'Whether to enable the channel',0 Align 4 SSZ103977A8______0: db ' 0',0 Align 4 SSZ103977B0_PhFreqCtr: db 'PhFreqCtr',0 Align 4 SSZ103977BC_Head: db 'Head',0 Align 4 SSZ103977C4_The_heading_in_degrees: db 'The heading in degrees',0 Align 4 SSZ103977DC_Velocity_in_kilometres_per_hour: db 'Velocity in kilometres per hour',0 L103977FC: db 41h; 'A' db 6Ch; 'l' db 74h; 't' db 00h; SSZ10397800_Altitude_in_metres_above_sea_lev: db 'Altitude in metres above sea level',0 Align 4 SSZ10397824_Long: db 'Long',0 Align 4 SSZ1039782C_Longitude_of_fix_position_in_deg: db 'Longitude of fix position in degrees East',0 Align 4 L10397858: db 4Ch; 'L' db 61h; 'a' db 74h; 't' db 00h; SSZ1039785C_Latitude_of_fix_position_in_degr: db 'Latitude of fix position in degrees North',0 Align 4 L10397888: db 46h; 'F' db 69h; 'i' db 78h; 'x' db 00h; SSZ1039788C_Whether_a_satellite_fix_has_been: db 'Whether a satellite fix has been acquired',0 Align 4 SSZ103978B8_Phidgets_GPS: db 'Phidgets GPS',0 Align 4 SSZ103978C8_PhIK_2_2_2: db 'PhIK 2/2/2',0 Align 4 L103978D4: db 43h; 'C' db 74h; are weird (cause i dont understa; SSZ103978D8_The_current_value_of_the_counter: db 'The current value of the counter',0 Align 4 SSZ103978FC_Reset_the_counter_to_zero: db 'Reset the counter to zero',0 Align 4 SSZ10397918_AIN7: db 'AIN7',0 Align 4 SSZ10397920_AIN6: db 'AIN6',0 Align 4 SSZ10397928_AIN5: db 'AIN5',0 Align 4 SSZ10397930_AIN4: db 'AIN4',0 Align 4 L10397938: db 42h; 'B' db 37h; '7' db 00h; db 00h; SSZ1039793C_Digital_I_O_15__Pin_39_: db 'Digital I/O 15 (Pin 39)',0 L10397954: db 42h; 'B' db 36h; '6' db 00h; db 00h; SSZ10397958_Digital_I_O_14__Pin_38_: db 'Digital I/O 14 (Pin 38)',0 L10397970: db 42h; 'B' db 35h; '5' db 00h; db 00h; SSZ10397974_Digital_I_O_13__Pin_37_: db 'Digital I/O 13 (Pin 37)',0 L1039798C: db 42h; 'B' db 34h; '4' db 00h; db 00h; SSZ10397990_Digital_I_O_12__Pin_36_: db 'Digital I/O 12 (Pin 36)',0 L103979A8: db 42h; 'B' db 33h; '3' db 00h; db 00h; SSZ103979AC_Digital_I_O_11__Pin_35_: db 'Digital I/O 11 (Pin 35)',0 L103979C4: db 42h; 'B' db 32h; '2' db 00h; db 00h; SSZ103979C8_Digital_I_O_10__Pin_34_: db 'Digital I/O 10 (Pin 34)',0 L103979E0: db 42h; 'B' db 31h; '1' db 00h; db 00h; SSZ103979E4_Digital_I_O_9__Pin_33_: db 'Digital I/O 9 (Pin 33)',0 Align 4 L103979FC: db 42h; 'B' db 30h; '0' db 00h; db 00h; SSZ10397A00_Digital_I_O_8__Pin_32_: db 'Digital I/O 8 (Pin 32)',0 Align 4 L10397A18: db 41h; 'A' db 37h; '7' db 00h; db 00h; SSZ10397A1C_Digital_I_O_7__Pin_28_: db 'Digital I/O 7 (Pin 28)',0 Align 4 L10397A34: db 41h; 'A' db 36h; '6' db 00h; db 00h; SSZ10397A38_Digital_I_O_6__Pin_27_: db 'Digital I/O 6 (Pin 27)',0 Align 4 L10397A50: db 41h; 'A' db 35h; '5' db 00h; db 00h; SSZ10397A54_Digital_I_O_5__Pin_26_: db 'Digital I/O 5 (Pin 26)',0 Align 4 L10397A6C: db 41h; 'A' db 34h; '4' db 00h; db 00h; SSZ10397A70_Digital_I_O_4__Pin_25_: db 'Digital I/O 4 (Pin 25)',0 Align 4 L10397A88: db 41h; 'A' db 33h; '3' db 00h; db 00h; SSZ10397A8C_Digital_I_O_3__Pin_24_: db 'Digital I/O 3 (Pin 24)',0 Align 4 L10397AA4: db 41h; 'A' db 32h; '2' db 00h; db 00h; SSZ10397AA8_Digital_I_O_2__Pin_23_: db 'Digital I/O 2 (Pin 23)',0 Align 4 SSZ10397AC0_Digital_I_O_1__Pin_22_: db 'Digital I/O 1 (Pin 22)',0 Align 4 SSZ10397AD8_Digital_I_O_0__Pin_21_: db 'Digital I/O 0 (Pin 21)',0 Align 4 SSZ10397AF0_Describes_the_status_of_the_boar: db 'Describes the status of the board. Error codes can be looked up in the MCC universal library documentation',0 Align 4 L10397B5C: db 44h; 'D' db 41h; 'A' db 31h; '1' db 00h; SSZ10397B60_Digital_to_analog_output_1__0_40: db 'Digital to analog output 1 (0-4095mV)',0 Align 4 L10397B88: db 44h; 'D' db 41h; 'A' db 30h; '0' db 00h; SSZ10397B8C_Digital_to_analog_output_0__0_40: db 'Digital to analog output 0 (0-4095mV)',0 db 00h; db 00h; db 00h; db 00h; db 00h; db 00h; SSZ10397BB8_Specifies_the_types__ranges_and_: db 'Specifies the types, ranges and directions for the analog and digital I/O',0 db 00h; db 00h; db 00h; db 00h; db 00h; db 00h; SSZ10397C08_The_number_of_the_board_you_want: db 'The number of the board you want to use (as assigned by InstaCal)',0 Align 4 SSZ10397C4C_MC_1208FS: db 'MC-1208FS',0 Align 4 SSZ10397C58_Sample: db 'Sample',0 Align 4 SSZ10397C60_Number_of_pixels_to_samples_to_d: db 'Number of pixels to samples to downsample by (1,2 or 4)',0 SSZ10397C98_Gain: db 'Gain',0 Align 4 SSZ10397CA0_Gain_in_dB: db 'Gain in dB',0 Align 4 L10397CAC: db 45h; 'E' db 78h; 'x' db 70h; 'p' db 00h; SSZ10397CB0_Exposure_in_microseconds__defaul: db 'Exposure in microseconds (default = 10000)',0 Align 4 L10397CDC: db 46h; 'F' db 70h; 'p' db 73h; 's' db 00h; SSZ10397CE0_Frame_rate_in_frames_per_second: db 'Frame rate in frames per second',0 SSZ10397D00_Format_of_the_captured_image_0_8: db 'Format of the captured image 0=8bitMono, 1=16bit, 2=24bit, 3=32bit',0 Align 4 SSZ10397D44_Height_of_the_captured_image__pi: db 'Height of the captured image (pixels)',0 Align 4 SSZ10397D6C_Width_of_the_captured_image__pix: db 'Width of the captured image (pixels)',0 Align 4 SSZ10397D94_Grabs_an_image_from_the_camera: db 'Grabs an image from the camera',0 Align 4 SSZ10397DB4_Closes_the_camera: db 'Closes the camera',0 Align 4 SSZ10397DC8_Opens_the_camera_to_allow_images: db 'Opens the camera to allow images to be captured',0 SSZ10397DF8_Id_of_the_camera_you_want_to_ope: db 'Id of the camera you want to open. Leave blank for the default device',0 Align 4 SSZ10397E40_XimeaCam: db 'XimeaCam',0 Align 4 L10397E4C: db 4Eh; 'N' db 6Fh; 'o' db 74h; 't' db 00h; SSZ10397E50_MultiVoice: db 'MultiVoice',0 Align 4 SSZ10397E5C_Play_position_as_a_percentage_if: db 'Play position as a percentage if applicable (0-100%)',0 Align 4 SSZ10397E94_The_current_state_of_the_streami: db 'The current state of the streaming media',0 Align 4 SSZ10397EC0_Video: db 'Video',0 Align 4 SSZ10397EC8_Stop_playing_the_media: db 'Stop playing the media',0 Align 4 SSZ10397EE0_Pause_or_play_the_media: db 'Pause or play the media',0 SSZ10397EF8_Start_playing_the_media_from_the: db 'Start playing the media from the beginning',0 Align 4 SSZ10397F24_Media_source___a_URL_or_file_pat: db 'Media source - a URL or file path',0 Align 4 SSZ10397F48_StreamIn: db 'StreamIn',0 Align 4 SSZ10397F54_Area__within_Max_area__occupied_: db 'Area (within Max area) occupied by the text',0 SSZ10397F80_Font_that_will_be_used_for_the_t: db 'Font that will be used for the text',0 L10397FA4: dd 40B9999Ah SSZ10397FA8_MaxArea: db 'MaxArea',0 SSZ10397FB0_Maximum_bounding_area_that_the_t: db 'Maximum bounding area that the text can occupy',0 Align 4 SSZ10397FE0_Measure: db 'Measure',0 SSZ10397FE8_FIO3: db 'FIO3',0 Align 4 SSZ10397FF0_Flexible_I_O_3: db 'Flexible I/O 3',0 Align 4 SSZ10398000_FIO2: db 'FIO2',0 Align 4 SSZ10398008_Flexible_I_O_2: db 'Flexible I/O 2',0 Align 4 SSZ10398018_FIO1: db 'FIO1',0 Align 4 SSZ10398020_Flexible_I_O_1: db 'Flexible I/O 1',0 Align 4 SSZ10398030_FIO0: db 'FIO0',0 Align 4 SSZ10398038_Flexible_I_O_0: db 'Flexible I/O 0',0 Align 4 SSZ10398048_I_O_Pin_at_which_the_timers_and_: db 'I/O Pin at which the timers and counters will start (0-8)',0 Align 4 SSZ10398084_Specifies_the_type_of_I_O_for_th: db 'Specifies the type of I/O for the 8xFIO, 8xEIO & 4xCIO',0 Align 4 SSZ103980BC_LabJackU3_LV: db 'LabJackU3-LV',0 Align 4 SSZ103980CC_AIN3: db 'AIN3',0 Align 4 SSZ103980D4_AIN2: db 'AIN2',0 Align 4 SSZ103980DC_AIN1: db 'AIN1',0 Align 4 SSZ103980E4_AIN0: db 'AIN0',0 Align 4 SSZ103980EC_Analog_input_0: db 'Analog input 0',0 Align 4 SSZ103980FC_CIO3: db 'CIO3',0 Align 4 SSZ10398104_Control__digital__I_O_3_19_on_th: db 'Control (digital) I/O 3/19 on the DB15 connector',0 Align 4 SSZ10398138_CIO2: db 'CIO2',0 Align 4 SSZ10398140_Control__digital__I_O_2_18_on_th: db 'Control (digital) I/O 2/18 on the DB15 connector',0 Align 4 SSZ10398174_CIO1: db 'CIO1',0 Align 4 SSZ1039817C_Control__digital__I_O_1_17_on_th: db 'Control (digital) I/O 1/17 on the DB15 connector',0 Align 4 SSZ103981B0_CIO0: db 'CIO0',0 Align 4 SSZ103981B8_Control__digital__I_O_0_16_on_th: db 'Control (digital) I/O 0/16 on the DB15 connector',0 Align 4 SSZ103981EC_EIO7: db 'EIO7',0 Align 4 SSZ103981F4_Extended_flexible_I_O_7_15_on_th: db 'Extended flexible I/O 7/15 on the DB15 connector',0 Align 4 SSZ10398228_EIO6: db 'EIO6',0 Align 4 SSZ10398230_Extended_flexible_I_O_6_14_on_th: db 'Extended flexible I/O 6/14 on the DB15 connector',0 Align 4 SSZ10398264_EIO5: db 'EIO5',0 Align 4 SSZ1039826C_Extended_flexible_I_O_5_13_on_th: db 'Extended flexible I/O 5/13 on the DB15 connector',0 Align 4 SSZ103982A0_EIO4: db 'EIO4',0 Align 4 SSZ103982A8_Extended_flexible_I_O_4_12_on_th: db 'Extended flexible I/O 4/12 on the DB15 connector',0 Align 4 SSZ103982DC_EIO3: db 'EIO3',0 Align 4 SSZ103982E4_Extended_flexible_I_O_3_11_on_th: db 'Extended flexible I/O 3/11 on the DB15 connector',0 Align 4 SSZ10398318_EIO2: db 'EIO2',0 Align 4 SSZ10398320_Extended_flexible_I_O_2_10_on_th: db 'Extended flexible I/O 2/10 on the DB15 connector',0 Align 4 SSZ10398354_EIO1: db 'EIO1',0 Align 4 SSZ1039835C_Extended_flexible_I_O_1_9_on_the: db 'Extended flexible I/O 1/9 on the DB15 connector',0 SSZ1039838C_EIO0: db 'EIO0',0 Align 4 SSZ10398394_Extended_flexible_I_O_0_8_on_the: db 'Extended flexible I/O 0/8 on the DB15 connector',0 SSZ103983C4_FIO7: db 'FIO7',0 Align 4 SSZ103983CC_Flexible_I_O_7: db 'Flexible I/O 7',0 Align 4 SSZ103983DC_FIO6: db 'FIO6',0 Align 4 SSZ103983E4_Flexible_I_O_6: db 'Flexible I/O 6',0 Align 4 SSZ103983F4_FIO5: db 'FIO5',0 Align 4 SSZ103983FC_Flexible_I_O_5: db 'Flexible I/O 5',0 Align 4 SSZ1039840C_FIO4: db 'FIO4',0 Align 4 SSZ10398414_Flexible_I_O_4: db 'Flexible I/O 4',0 Align 4 SSZ10398424_DAC1: db 'DAC1',0 Align 4 SSZ1039842C_Digital_to_analog_output_1__0_5V: db 'Digital to analog output 1 (0-5V)',0 Align 4 SSZ10398450_DAC0: db 'DAC0',0 Align 4 SSZ10398458_Digital_to_analog_output_0__0_5V: db 'Digital to analog output 0 (0-5V)',0 Align 4 SSZ1039847C_Reset: db 'Reset',0 db 00h; db 00h; db 00h; db 00h; db 00h; db 00h; SSZ10398488_Reset_timers_or_counters__1_time: db 'Reset timers or counters (1=timer1, 2=timer2, 3=counter1, 4=counter2)',0 Align 4 SSZ103984D0_Applies_the_timer_and_counter_co: db 'Applies the timer and counter configuration',0 SSZ103984FC_Counters: db 'Counters',0 Align 4 SSZ10398508_Number_of_counters__2_maximum_: db 'Number of counters (2 maximum)',0 Align 4 L10398528: dd 40900000h SSZ1039852C_Timers: db 'Timers',0 db 00h; db 00h; db 00h; db 00h; db 00h; SSZ10398538_Timer_options_as_a_formatted_str: db 'Timer options as a formatted string (see component ref for specification)',0 Align 4 SSZ10398584_StartPin: db 'StartPin',0 Align 4 SSZ10398590_I_O_Pin_at_which_the_timers_and_: db 'I/O Pin at which the timers and counters will start (4-8)',0 Align 4 SSZ103985CC_The_ambient_temperature_of_the_d: db 'The ambient temperature of the device in degrees',0 Align 4 SSZ10398600_Applies_the_I_O_configuration: db 'Applies the I/O configuration',0 Align 4 L10398620: db 49h; 'I' db 2Fh; '/' db 4Fh; 'O' db 00h; SSZ10398624_Specifies_the_type_of_I_O_for_th: db 'Specifies the type of I/O for the 4xFIO, 8xEIO & 4xCIO',0 Align 4 L1039865C: dd 40B00000h SSZ10398660_Address: db 'Address',0 SSZ10398668_Address_or_local_ID_of_the_LabJa: db 'Address or local ID of the LabJack you want to use or leave blank to use any',0 Align 4 SSZ103986B8_LabJackU3_HV: db 'LabJackU3-HV',0 Align 4 L103986C8: db 61h; 'a' db 00h; db 00h; db 00h; SSZ103986CC_The_result_of_the_check: db 'The result of the check',0 SSZ103986E4_Else: db 'Else',0 Align 4 SSZ103986EC_The_result_to_send_if_no_compari: db 'The result to send if no comparisons succeeded',0 Align 4 SSZ1039871C_Then: db 'Then',0 Align 4 SSZ10398724_The_result_to_send_after_a_succe: db 'The result to send after a successful comparison',0 Align 4 SSZ10398758_Conditions: db 'Conditions',0 Align 4 SSZ10398764_The_conditions_to_compare_with: db 'The conditions to compare with',0 Align 4 L10398784: db 4Fh; 'O' db 70h; 'p' db 00h; db 00h; SSZ10398788_The_comparison_operation_to_use_: db 'The comparison operation to use - =,<=,<,>,>= (default is =)',0 Align 4 L103987C8: db 49h; 'I' db 66h; 'f' db 00h; db 00h; SSZ103987CC_The_control_variable_to_be_compa: db 'The control variable to be compared',0 SSZ103987F0_The_type_of_data_to_compare___st: db 'The type of data to compare - string,int,float (default is string)',0 Align 4 SSZ10398834_IfThenElse: db 'IfThenElse',0 Align 4 SSZ10398840_Numbers: db 'Numbers',0 SSZ10398848_Array_of_numbers_corresponding_t: db 'Array of numbers corresponding to the messages that have arrived',0 Align 4 SSZ1039888C_Messages: db 'Messages',0 Align 4 SSZ10398898_Array_of_messages_that_have_arri: db 'Array of messages that have arrived',0 SSZ103988BC_Number_of_messages_in_the_send_q: db 'Number of messages in the send queue',0 Align 4 SSZ103988E4_Status: db 'Status',0 Align 4 SSZ103988EC_Last_sent_message_status__0_succ: db 'Last sent message status: 0=success,1=sending,2=failed',0 Align 4 SSZ10398924_Signal: db 'Signal',0 Align 4 SSZ1039892C_The_signal_strength_at_the_GSM_b: db 'The signal strength at the GSM board (0-30, -1 if searching)',0 Align 4 SSZ1039896C_Board: db 'Board',0 Align 4 SSZ10398974_0_No_board__1_FlowBoard__2_FlowB: db '0=No board, 1=FlowBoard, 2=FlowBoard+GSM Board',0 Align 4 SSZ103989A4_Clears_all_received_messages_and: db 'Clears all received messages and numbers',0 Align 4 SSZ103989D0_Pops_the_top__oldest__message_an: db 'Pops the top (oldest) message and number off the lists',0 Align 4 SSZ10398A08_Sends_the_message: db 'Sends the message',0 Align 4 SSZ10398A1C_Number: db 'Number',0 Align 4 SSZ10398A24_Telephon_number_to_send_to: db 'Telephon number to send to',0 Align 4 SSZ10398A40_Message: db 'Message',0 SSZ10398A48_Message_to_be_sent__160_chars_ma: db 'Message to be sent (160 chars max)',0 Align 4 SSZ10398A6C_The_associated_FlowBoard_compone: db 'The associated FlowBoard component',0 Align 4 SSZ10398A90_FlowBoardGSM: db 'FlowBoardGSM',0 Align 4 SSZ10398AA0_ASIO: db 'ASIO',0 Align 4 SSZ10398AA8_Whether_ASIO_is_currently_select: db 'Whether ASIO is currently selected and therefore whether ASIO settings can be opened',0 Align 4 SSZ10398B00_Trigger_to_open_the_settings_pan: db 'Trigger to open the settings panel. Note that ASIO must be on to allow this',0 SSZ10398B4C_ASIOSettings: db 'ASIOSettings',0 Align 4 SSZ10398B5C_HSV2C: db 'HSV2C',0 Align 4 L10398B64: db 56h; 'V' db 00h; db 00h; db 00h; SSZ10398B68_Value__0_255_: db 'Value (0-255)',0 Align 4 SSZ10398B78_Saturation__0_255_: db 'Saturation (0-255)',0 Align 4 SSZ10398B8C_Hue__0_360_: db 'Hue (0-360)',0 L10398B98: db 48h; 'H' db 53h; 'S' db 56h; 'V' db 00h; SSZ10398B9C_HSV_as_comma_separated_string: db 'HSV as comma separated string',0 Align 4 SSZ10398BBC_C2HSV: db 'C2HSV',0 Align 4 SSZ10398BC4_hex2b: db 'hex2b',0 Align 4 SSZ10398BCC_b2hex: db 'b2hex',0 Align 4 SSZ10398BD4_Constantly_updating_frames_of_vi: db 'Constantly updating frames of video',0 SSZ10398BF8_Mute: db 'Mute',0 Align 4 SSZ10398C00_Stops_audio_from_playing_through: db 'Stops audio from playing through default audio device',0 Align 4 SSZ10398C38_Trigger_to_grab_a_frame_when_in_: db 'Trigger to grab a frame when in manual mode',0 SSZ10398C64_Manual: db 'Manual',0 Align 4 SSZ10398C6C_Set_to_true_if_you_want_to_trigg: db 'Set to true if you want to trigger when a frame is grabbed',0 Align 4 SSZ10398CA8_Stop_playing_the_video: db 'Stop playing the video',0 Align 4 SSZ10398CC0_Pause_or_play_the_video: db 'Pause or play the video',0 SSZ10398CD8_Single_step_advance: db 'Single step advance',0 SSZ10398CEC_Start_playing_the_video_from_the: db 'Start playing the video from the beginning',0 Align 4 SSZ10398D18_Height_of_the_video_in_pixels__d: db 'Height of the video in pixels (default to 480)',0 Align 4 SSZ10398D48_Width_of_the_video_in_pixels__de: db 'Width of the video in pixels (defaults to 640)',0 Align 4 SSZ10398D78_Video_source___a_URL_or_file_pat: db 'Video source - a URL or file path',0 Align 4 SSZ10398D9C_VideoStreamIn: db 'VideoStreamIn',0 Align 4 SSZ10398DAC_vlcBmp: db 'vlcBmp',0 Align 4 L10398DB4: db 76h; 'v' db 6Ch; 'l' db 63h; 'c' db 00h; SSZ10398DB8_Position: db 'Position',0 Align 4 SSZ10398DC4_Information_about_the_state_of_t: db 'Information about the state of the component and media',0 Align 4 SSZ10398DFC_Pause_or_resume_streaming_media: db 'Pause or resume streaming media',0 SSZ10398E1C_Start_streaming_the_media_from_t: db 'Start streaming the media from the start',0 Align 4 SSZ10398E48_Args: db 'Args',0 Align 4 SSZ10398E50_Array_of_VLC_arguments: db 'Array of VLC arguments',0 Align 4 L10398E68: db 56h; 'V' db 4Ch; 'L' db 43h; 'C' db 00h; SSZ10398E6C_ComRcvStr: db 'ComRcvStr',0 Align 4 SSZ10398E78_Terminr: db 'Terminr',0 SSZ10398E80_The_ASCII_code_of_the_string_ter: db 'The ASCII code of the string terminator',0 SSZ10398EA8_ComSendStr: db 'ComSendStr',0 Align 4 SSZ10398EB4_Max_Position: db 'Max Position',0 Align 4 SSZ10398EC4_Min_Position: db 'Min Position',0 Align 4 SSZ10398ED4_Acceleration_Limit: db 'Acceleration Limit',0 Align 4 SSZ10398EE8_Velocity: db 'Velocity',0 Align 4 SSZ10398EF4_Servo_Type: db 'Servo Type',0 Align 4 SSZ10398F00_Downloaded_image: db 'Downloaded image',0 Align 4 SSZ10398F14_Download: db 'Download',0 Align 4 SSZ10398F20_Trigger_when_data_is_received: db 'Trigger when data is received',0 Align 4 SSZ10398F40_Data_received_from_the_port: db 'Data received from the port',0 SSZ10398F5C_Opens_the_specified_port_for_rec: db 'Opens the specified port for receiving data',0 SSZ10398F88_Number_of_bits_in_each_bytes_rec: db 'Number of bits in each bytes received (default 8)',0 Align 4 SSZ10398FBC_ComRcv: db 'ComRcv',0 Align 4 SSZ10398FC4_Trigger_when_data_has_been_sent_: db 'Trigger when data has been sent successfully',0 Align 4 SSZ10398FF4_The_byte_of_data_you_want_to_sen: db 'The byte of data you want to send',0 Align 4 SSZ10399018_Opens_the_specified_port_for_sen: db 'Opens the specified port for sending data',0 Align 4 SSZ10399044_ByteSize: db 'ByteSize',0 Align 4 SSZ10399050_ComSend: db 'ComSend',0 SSZ10399058_Processed_image_with_edge_detect: db 'Processed image with edge detection',0 SSZ1039907C_Aperture: db 'Aperture',0 Align 4 SSZ10399088_Aperture_size_option_for_the_Sob: db 'Aperture size option for the Sobel() operator (0=3,1=5,2=7)',0 SSZ103990C4_Thresh2: db 'Thresh2',0 SSZ103990CC_The_second_threshold_for_the_hys: db 'The second threshold for the hysteresis procedure',0 Align 4 SSZ10399100_Thresh1: db 'Thresh1',0 SSZ10399108_The_first_threshold_for_the_hyst: db 'The first threshold for the hysteresis procedure',0 Align 4 SSZ1039913C_CannyEdge: db 'CannyEdge',0 Align 4 SSZ10399148_Image: db 'Image',0 Align 4 SSZ10399150_Window: db 'Window',0 Align 4 SSZ10399158_Image_from_camera: db 'Image from camera',0 Align 4 SSZ1039916C_Flip: db 'Flip',0 Align 4 SSZ10399174_Whether_to_flip_the_frame_to_cre: db 'Whether to flip the frame to create a mirror image',0 Align 4 SSZ103991A8_Grab: db 'Grab',0 Align 4 SSZ103991B0_Grabs_an_image: db 'Grabs an image',0 Align 4 SSZ103991C0_Closes_the_web_cam: db 'Closes the web cam',0 Align 4 SSZ103991D4_Opens_the_web_cam_to_allow_image: db 'Opens the web cam to allow images to be captured',0 Align 4 SSZ10399208_Camera: db 'Camera',0 Align 4 SSZ10399210_Id_of_the_camera_you_want_to_ope: db 'Id of the camera you want to open. Leave blank for default web cam',0 Align 4 SSZ10399254_WebCam: db 'WebCam',0 Align 4 SSZ1039925C_Log_of_activity_on_the_socket: db 'Log of activity on the socket',0 Align 4 SSZ1039927C_The_data_that_has_been_sent: db 'The data that has been sent',0 SSZ10399298_IP_address_that_you_are_connecte: db 'IP address that you are connected to',0 Align 4 SSZ103992C0_Whether_the_socket_is_open: db 'Whether the socket is open',0 Align 4 SSZ103992DC_Whether_to_log_activity_across_t: db 'Whether to log activity across the socket',0 Align 4 SSZ10399308_Closes_the_socket: db 'Closes the socket',0 Align 4 SSZ1039931C_Opens_the_socket_so_that_you_can: db 'Opens the socket so that you can start sending data',0 SSZ10399350_Log_of_server_activity: db 'Log of server activity',0 Align 4 SSZ10399368_Whether_the_server_is_listening: db 'Whether the server is listening',0 SSZ10399388_Analog_Input_0: db 'Analog Input 0',0 Align 4 SSZ10399398_PhIK_8_8_8: db 'PhIK 8/8/8',0 Align 4 SSZ103993A4_I2PI: db 'I2PI',0 Align 4 SSZ103993AC_Array_of_256_samples_defining_th: db 'Array of 256 samples defining the wave',0 Align 4 SSZ103993D4_Center: db 'Center',0 Align 4 SSZ103993DC_Radius: db 'Radius',0 Align 4 SSZ103993E4_GraphDots: db 'GraphDots',0 Align 4 SSZ103993F0_replace: db 'replace',0 SSZ103993F8_Replaces_the_current_array: SSZ103994A4_Wave_table__256x256_: db 'Wave table (256x256)',0 Align 4 SSZ103994BC_Number_of_frames_per_second_that: db 'Number of frames per second that the video will go out at',0 Align 4 SSZ103994F8_Stops_streaming: db 'Stops streaming',0 SSZ10399508_Starts_streaming: db 'Starts streaming',0 Align 4 SSZ1039951C_Image_Height: db 'Image Height',0 Align 4 SSZ1039952C_Image_width: db 'Image width',0 SSZ10399538_The_source_of_the_images_you_wan: db 'The source of the images you want stream',0 Align 4 SSZ10399564_VideoStreamOut: db 'VideoStreamOut',0 Align 4 SSZ10399574_Whether_streaming_is_on_or_off: db 'Whether streaming is on or off',0 Align 4 SSZ10399594_Set_the_buffer_size_in_seconds__: db 'Set the buffer size in seconds (minimum=0.25s, default=1s)',0 Align 4 SSZ103995D0_Stop_streaming: db 'Stop streaming',0 Align 4 SSZ103995E0_Start_streaming_audio: db 'Start streaming audio',0 Align 4 SSZ103995F8_Parameters: db 'Parameters',0 Align 4 SSZ10399604_VLC_parameters_defining_transcod: db 'VLC parameters defining transcoding and streaming',0 Align 4 SSZ10399638_AudioStreamOut: db 'AudioStreamOut',0 Align 4 SSZ10399648_Any_returned_data_from_the_serve: db 'Any returned data from the server',0 Align 4 L1039966C: db 4Fh; 'O' db 6Bh; 'k' db 00h; db 00h; SSZ10399670_Result_of_the_last_post___true_i: db 'Result of the last post - true if successful',0 Align 4 SSZ103996A0_Submit: db 'Submit',0 Align 4 SSZ103996A8_Values: db 'Values',0 Align 4 SSZ103996B0_Array_of_data_item_values: db 'Array of data item values',0 Align 4 SSZ103996CC_Names: db 'Names',0 Align 4 SSZ103996D4_Array_of_data_item_names: db 'Array of data item names',0 Align 4 SSZ103996F0_Page: db 'Page',0 Align 4 SSZ103996F8_The_full_path_to_the_page_you_wa: db 'The full path to the page you want to post to',0 Align 4 SSZ10399728_The_address_of_the_server_you_wa: db 'The address of the server you want to post to',0 Align 4 SSZ10399758_HttpPost: db 'HttpPost',0 Align 4 SSZ10399764_For_connecting_components_for_ac: db 'For connecting components for accessing extension boards',0 Align 4 SSZ103997A0_Analog_input_8: db 'Analog input 8',0 Align 4 SSZ10399848_Play_position_as_a_percentage__0: db 'Play position as a percentage (0-100%)',0 Align 4 SSZ10399870_State: db 'State',0 Align 4 SSZ10399878_Play_state__0_stopped__1_playing: db 'Play state. 0=stopped, 1=playing, 2=paused',0 Align 4 SSZ103998A4_Right_channel_audio: db 'Right channel audio',0 SSZ103998B8_Left_channel_audio: db 'Left channel audio',0 Align 4 SSZ103998CC_Buffer: db 'Buffer',0 Align 4 SSZ103998D4_Set_the_buffer_size_in_seconds__: db 'Set the buffer size in seconds (minimum=0.25s default=1s)',0 Align 4 SSZ10399910_Stop_playing: db 'Stop playing',0 Align 4 SSZ10399920_Pause_Play: db 'Pause/Play',0 Align 4 SSZ1039992C_Pause_or_resume_playing_media: db 'Pause or resume playing media',0 Align 4 SSZ1039994C_Start_playing_the_media_from_the: db 'Start playing the media from the start',0 Align 4 SSZ10399974_Source: db 'Source',0 Align 4 SSZ1039997C_Source_file_or_location_of_media: db 'Source file or location of media you want to stream',0 L103999B0: dd 41400000h SSZ103999B4_AudioStreamIn: db 'AudioStreamIn',0 Align 4 SSZ103999C4_Delayed_video: db 'Delayed video',0 Align 4 SSZ103999D4_Number_of_frames_to_delay_by: db 'Number of frames to delay by',0 Align 4 SSZ103999F4_VideoDelay: db 'VideoDelay',0 Align 4 SSZ10399A00_DPad: db 'DPad',0 Align 4 SSZ10399A08_D_pad_position_as_an_angle_in_de: db 'D-pad position as an angle in degrees. -1 if not pressed',0 Align 4 SSZ10399A44_Start_button: db 'Start button',0 Align 4 L10399A54: dd 4099999Ah SSZ10399A58_Select: db 'Select',0 Align 4 SSZ10399A60_Select_button: db 'Select button',0 Align 4 L10399A70: db 52h; 'R' db 31h; '1' db 00h; db 00h; SSZ10399A74_Right_upper_trigger_button: db 'Right upper trigger button',0 Align 4 L10399A90: db 4Ch; 'L' db 31h; '1' db 00h; db 00h; SSZ10399A94_Left_upper_trigger_button: db 'Left upper trigger button',0 db 00h; db 00h; SSZ10399AD4_Left_lower_trigger_button: db 'Left lower trigger button',0 Align 4 SSZ10399AF0_Square: db 'Square',0 Align 4 SSZ10399AF8_Button_Square: db 'Button Square',0 Align 4 SSZ10399B08_Cross: db 'Cross',0 Align 4 SSZ10399B10_Button_Cross: db 'Button Cross',0 Align 4 SSZ10399B20_Circle: db 'Circle',0 Align 4 SSZ10399B28_Button_Circle: db 'Button Circle',0 Align 4 SSZ10399B38_Triangle: db 'Triangle',0 Align 4 SSZ10399B44_Button_Triangle: db 'Button Triangle',0 SSZ10399B54_Attempts_to_connect_to_an_attach: db 'Attempts to connect to an attached Lynxmotion PS2 controller',0 Align 4 L10399B94: db 50h; 'P' db 53h; 'S' db 32h; '2' db 00h; L10399B98: db 52h; 'R' db 65h; 'e' db 63h; 'c' db 00h; SSZ10399B9C_Whether_the_component_is_current: db 'Whether the component is currently recording or not',0 SSZ10399BD0_Stops_recording: db 'Stops recording',0 SSZ10399BE0_Starts_recording_to_the_specifie: db 'Starts recording to the specified file',0 Align 4 SSZ10399C08_The_required_frame_rate__frames_: db 'The required frame rate (frames/sec) default=30',0 L10399C38: dd 40866666h SSZ10399C3C_Codec: db 'Codec',0 db 00h; db 00h; db 00h; db 00h; db 00h; db 00h; SSZ10399C48_4_letter_signature_for_the_codec: db '4 letter signature for the codec you want to use or ',27h,'-1',27h,' to show dialog (opt)',0 Align 4 L10399C98: dd 40600000h SSZ10399C9C_Full_path_and_name_of_target_fil: db 'Full path and name of target file (must be a .avi)',0 Align 4 L10399CD0: db 53h; 'S' db 72h; 'r' db 63h; 'c' db 00h; SSZ10399CD4_Source_video: db 'Source video',0 Align 4 SSZ10399CE4_VideoSave: db 'VideoSave',0 Align 4 L10399CF0: db 44h; 'D' db 69h; 'i' db 72h; 'r' db 00h; SSZ10399CF4_Direction_of_motion_angles_for_e: db 'Direction of motion angles for each detection point',0 L10399D28: db 48h; 'H' db 00h; db 00h; db 00h; L10399D2C: db 57h; 'W' db 00h; db 00h; db 00h; SSZ10399D30_Widths_of_area_of_detection: db 'Widths of area of detection',0 SSZ10399D4C_Y_coordinates_of_detection_point: db 'Y-coordinates of detection points',0 Align 4 SSZ10399D70_X_coordinates_of_detection_point: db 'X-coordinates of detection points',0 Align 4 SSZ10399D94_Movt: db 'Movt',0 Align 4 SSZ10399D9C_Whether_movement_has_been_detect: db 'Whether movement has been detected',0 Align 4 L10399DC0: db 4Dh; 'M' db 48h; 'H' db 49h; 'I' db 00h; SSZ10399DC4_The_motion_history_image: db 'The motion history image',0 Align 4 SSZ10399DE0_MaxT: db 'MaxT',0 Align 4 SSZ10399DE8_Maximum_motion_history_image_dur: db 'Maximum motion history image duration (secs) default=0.5',0 Align 4 SSZ10399E24_MinT: db 'MinT',0 Align 4 SSZ10399E2C_Minimum_motion_history_image_dur: db 'Minimum motion history image duration (secs) default=0.05',0 Align 4 SSZ10399E68_Motion_history_duration__secs__d: db 'Motion history duration (secs) default=1',0 Align 4 SSZ10399E94_Delta: db 'Delta',0 Align 4 SSZ10399E9C_Threshold_for_detecting_image_tr: db 'Threshold for detecting image transitions, default=30',0 Align 4 SSZ10399ED4_MotionDetect: db 'MotionDetect',0 Align 4 L10399EE4: db 63h; 'c' db 59h; 'Y' db 00h; db 00h; SSZ10399EE8_Y_coordinate_of_centroid: db 'Y-coordinate of centroid',0 Align 4 L10399F04: db 63h; 'c' db 58h; 'X' db 00h; db 00h; SSZ10399F08_X_coordinate_of_centroid: db 'X-coordinate of centroid',0 Align 4 SSZ10399F24_The_largest_detected_region_of_c: db 'The largest detected region of colour',0 Align 4 L10399F4C: db 4Dh; 'M' db 61h; 'a' db 70h; 'p' db 00h; SSZ10399F50_Image_showing_detected_regions_o: db 'Image showing detected regions of colour',0 Align 4 SSZ10399F7C_MinArea: db 'MinArea',0 SSZ10399F84_Threshold_for_discarding_detecti: db 'Threshold for discarding detections based on area',0 Align 4 L10399FB8: db 55h; 'U' db 70h; 'p' db 70h; 'p' db 00h; SSZ10399FBC_Upper_HSV_threshold_in_form___h_: db 'Upper HSV threshold in form ',27h,'<h>,<s>,v>',27h,0 Align 4 L10399FE8: db 4Ch; 'L' db 6Fh; 'o' db 77h; 'w' db 00h; SSZ10399FEC_Lower_HSV_threshold_in_form___h_: db 'Lower HSV threshold in form ',27h,'<h>,<s>,v>',27h,0 Align 4 SSZ1039A018_ColourDetect: db 'ColourDetect',0 Align 4 SSZ1039A028_Track: db 'Track',0 Align 4 SSZ1039A030_Whether_you_are_currently_tracki: db 'Whether you are currently tracking',0 Align 4 SSZ1039A054_Angle: db 'Angle',0 Align 4 SSZ1039A05C_The_rotation_angle_of_the_area_y: db 'The rotation angle of the area you are tracking',0 SSZ1039A08C_The_area_you_are_tracking: db 'The area you are tracking',0 Align 4 SSZ1039A0A8_vmin: db 'vmin',0 Align 4 SSZ1039A0B0_Minimum_value_considered_in_HSV_: db 'Minimum value considered in HSV image (opt)',0 SSZ1039A0DC_smin: db 'smin',0 Align 4 SSZ1039A0E4_Minimum_saturation_considered_in: db 'Minimum saturation considered in HSV image (opt)',0 Align 4 SSZ1039A118_stop: db 'stop',0 Align 4 SSZ1039A120_Stop_tracking: db 'Stop tracking',0 Align 4 SSZ1039A130_Start_tracking: db 'Start tracking',0 Align 4 SSZ1039A140_Rect: db 'Rect',0 Align 4 SSZ1039A148_Area_of_the_image_you_want_to_st: db 'Area of the image you want to start to track (pixels)',0 Align 4 SSZ1039A180_CamShift: db 'CamShift',0 Align 4 L1039A18C: dd 40733333h SSZ1039A190_Count: db 'Count',0 Align 4 SSZ1039A198_Number_of_detections: db 'Number of detections',0 Align 4 SSZ1039A1B0_Area_defining_any_detected_face_: db 'Area defining any detected face, body or feature',0 Align 4 SSZ1039A1E4_Rough: db 'Rough',0 Align 4 SSZ1039A1EC_Whether_to_perform_only_a_rough_: db 'Whether to perform only a rough calculation',0 SSZ1039A218_Single: db 'Single',0 Align 4 SSZ1039A220_Whether_to_find_only_one_object: db 'Whether to find only one object',0 SSZ1039A240_Prune: db 'Prune',0 Align 4 SSZ1039A248_Whether_to_apply_Canny_pruning: db 'Whether to apply Canny pruning',0 Align 4 SSZ1039A268_Smallest_feature_size__default__: db 'Smallest feature size (default = 0)',0 L1039A28C: db 58h; 'X' db 4Dh; 'M' db 4Ch; 'L' db 00h; SSZ1039A290_Path_to_XML_file_containing_Haar: db 'Path to XML file containing Haar classification data',0 Align 4 SSZ1039A2C8_HaarFace: db 'HaarFace',0 Align 4 L1039A2D4: dd 404CCCCDh SSZ1039A2D8_Processed_image_with_gaussian_bl: db 'Processed image with gaussian blur',0 Align 4 SSZ1039A2FC_SigmaY: db 'SigmaY',0 Align 4 SSZ1039A304_The_Y_component_of_the_gaussian_: db 'The Y component of the gaussian kernel standard deviation',0 Align 4 SSZ1039A340_SigmaX: db 'SigmaX',0 Align 4 SSZ1039A348_The_X_component_of_the_gaussian_: db 'The X component of the gaussian kernel standard deviation',0 Align 4 SSZ1039A384_SizeY: db 'SizeY',0 Align 4 SSZ1039A38C_The_Y_component_of_the_gaussian_: db 'The Y component of the gaussian kernel size',0 SSZ1039A3B8_SizeX: db 'SizeX',0 Align 4 SSZ1039A3C0_The_X_component_of_the_gaussian_: db 'The X component of the gaussian kernel size',0 SSZ1039A3EC_Source_Image: db 'Source Image',0 Align 4 SSZ1039A3FC_GaussBlur: db 'GaussBlur',0 Align 4 SSZ1039A408_Error: db 'Error',0 Align 4 SSZ1039A410_Any_error_messages_received_from: db 'Any error messages received from the X10 network',0 Align 4 SSZ1039A444_Trigger_when_a_command_is_sent_s: db 'Trigger when a command is sent successfully',0 SSZ1039A470_String_commands_received_from_th: db 'String commands received from the X10 network',0 Align 4 SSZ1039A4A0_Sends_the_specified_command: db 'Sends the specified command',0 L1039A4BC: dd 40CCCCCDh SSZ1039A4C0_Command: db 'Command',0 SSZ1039A4C8_X10_command_string_eg___sendplc_: db 'X10 command string eg. ',27h,'sendplc a3 dim 75',27h,0 Align 4 L1039A4F4: db 58h; 'X' db 31h; '1' db 30h; '0' db 00h; SSZ1039A4F8_hex2s: db 'hex2s',0 Align 4 SSZ1039A500_s2hex: db 's2hex',0 Align 4 SSZ1039A508_RTrigg: db 'RTrigg',0 Align 4 SSZ1039A510_Right_trigger__0_to_1_: db 'Right trigger (0 to 1)',0 Align 4 SSZ1039A528_LTrigg: db 'LTrigg',0 Align 4 SSZ1039A530_Left_trigger__0_to_1_: db 'Left trigger (0 to 1)',0 Align 4 SSZ1039A548_RThumbY: db 'RThumbY',0 SSZ1039A550_Right_thumb_stick_Y_axis___1_to_: db 'Right thumb stick Y-axis (-1 to 1)',0 Align 4 SSZ1039A574_RThumbX: db 'RThumbX',0 SSZ1039A57C_Right_thumb_stick_X_axis___1_to_: db 'Right thumb stick X-axis (-1 to 1)',0 Align 4 SSZ1039A5A0_LThumbY: db 'LThumbY',0 SSZ1039A5A8_Left_thumb_stick_Y_axis___1_to_1: db 'Left thumb stick Y-axis (-1 to 1)',0 Align 4 SSZ1039A5CC_LThumbX: db 'LThumbX',0 SSZ1039A5D4_Left_thumb_stick_X_axis___1_to_1: db 'Left thumb stick X-axis (-1 to 1)',0 Align 4 SSZ1039A5F8_RThumb: db 'RThumb',0 Align 4 SSZ1039A600_Right_thumb_stick_press: db 'Right thumb stick press',0 SSZ1039A618_LThumb: db 'LThumb',0 Align 4 SSZ1039A620_Left_thumb_stick_press: db 'Left thumb stick press',0 Align 4 SSZ1039A638_Back: db 'Back',0 Align 4 SSZ1039A640_Button_Back: db 'Button Back',0 SSZ1039A64C_Button_Start: db 'Button Start',0 Align 4 L1039A65C: db 52h; 'R' db 53h; 'S' db 00h; db 00h; SSZ1039A660_Button___Right_shoulder: db 'Button - Right shoulder',0 L1039A678: db 4Ch; 'L' db 53h; 'S' db 00h; db 00h; SSZ1039A67C_Button___Left_shoulder: db 'Button - Left shoulder',0 Align 4 SSZ1039A694_D_Pad_Right: db 'D-Pad Right',0 SSZ1039A6A0_D_Pad_Left: db 'D-Pad Left',0 Align 4 SSZ1039A6AC_D_Pad_Down: db 'D-Pad Down',0 Align 4 SSZ1039A6B8_D_Pad_Up: db 'D-Pad Up',0 Align 4 SSZ1039A6C4_Button_Y: db 'Button Y',0 Align 4 SSZ1039A6D0_Button_X: db 'Button X',0 Align 4 SSZ1039A6DC_RRmbl: db 'RRmbl',0 Align 4 SSZ1039A6E4_Set_right_rumble_level__0_1_: db 'Set right rumble level (0-1)',0 Align 4 L1039A704: dd 40A66666h SSZ1039A708_LRmbl: db 'LRmbl',0 Align 4 SSZ1039A710_Set_left_rumble_level__0_1_: db 'Set left rumble level (0-1)',0 SSZ1039A72C_Attempts_to_connect_to_an_attach: db 'Attempts to connect to an attached XBox360 controller',0 Align 4 SSZ1039A764_XBox360: db 'XBox360',0 SSZ1039A76C_Number_of_strings_in_the_stack: db 'Number of strings in the stack',0 Align 4 SSZ1039A78C_Pops_a_string_off_the_top_of_the: db 'Pops a string off the top of the stack',0 Align 4 SSZ1039A7B4_Pushes_a_string_onto_the_stack: db 'Pushes a string onto the stack',0 Align 4 SSZ1039A7D4_String_to_be_pushed_onto_the_sta: db 'String to be pushed onto the stack',0 Align 4 SSZ1039A7F8_Number_of_strings_in_the_queue: db 'Number of strings in the queue',0 Align 4 SSZ1039A818_Pops_a_string_off_the_front_of_t: db 'Pops a string off the front of the queue',0 Align 4 SSZ1039A844_Pushes_a_string_onto_the_end_of_: db 'Pushes a string onto the end of queue',0 Align 4 SSZ1039A86C_String_to_be_added_to_the_queue: db 'String to be added to the queue',0 SSZ1039A88C_The_stack_in_array_form: db 'The stack in array form',0 SSZ1039A8A4_Number_of_values_in_the_stack: db 'Number of values in the stack',0 Align 4 SSZ1039A8C4_Top_item_on_the_stack: db 'Top item on the stack',0 Align 4 SSZ1039A8DC_Clears_the_stack: db 'Clears the stack',0 Align 4 SSZ1039A8F0_Pops_a_value_off_the_top_of_the_: db 'Pops a value off the top of the stack',0 Align 4 SSZ1039A918_Pushes_a_value_onto_the_stack: db 'Pushes a value onto the stack',0 Align 4 SSZ1039A938_Value_to_be_pushed_onto_the_stac: db 'Value to be pushed onto the stack',0 Align 4 SSZ1039A95C_Stack: db 'Stack',0 Align 4 SSZ1039A964_Ports: db 'Ports',0 Align 4 SSZ1039A96C_Array_of_available_COM_port_numb: db 'Array of available COM port numbers',0 SSZ1039A990_Log_of_activity_on_the_port__if_: db 'Log of activity on the port (if requested)',0 Align 4 SSZ1039A9BC_Trigger_when_data_goes_out_throu: db 'Trigger when data goes out through the port',0 SSZ1039A9E8_Data_coming_in_through_the_port: db 'Data coming in through the port',0 SSZ1039AA08_Whether_the_port_is_open: db 'Whether the port is open',0 Align 4 SSZ1039AA24_NoNull: db 'NoNull',0 db 00h; db 00h; db 00h; db 00h; db 00h; SSZ1039AA30_Whether_to_remove_the_null_termi: db 'Whether to remove the null terminator from sent data (applies to non-hex only)',0 Align 4 SSZ1039AA80_Whether_to_log_activity_on_the_p: db 'Whether to log activity on the port',0 SSZ1039AAA4_Sends_the_data_out_through_the_p: db 'Sends the data out through the port',0 SSZ1039AAC8_RxTerminator: db 'RxTerminator',0 Align 4 SSZ1039AAD8_ASCII_code_of_terminator_for_rec: db 'ASCII code of terminator for received data (if not provided data comes in single bytes)',0 SSZ1039AB30_The_string_of_data_you_want_to_s: db 'The string of data you want to send',0 SSZ1039AB54_Closes_the_port: db 'Closes the port',0 SSZ1039AB64_Opens_the_port: db 'Opens the port',0 Align 4 SSZ1039AB74_ByteSz: db 'ByteSz',0 Align 4 SSZ1039AB7C_Number_of_bits_in_each_bytes_sen: db 'Number of bits in each bytes sent (default 8)',0 Align 4 SSZ1039ABAC_Parity: db 'Parity',0 Align 4 SSZ1039ABB4_Parity_scheme___0_None_1_Odd_2_E: db 'Parity scheme - 0=None,1=Odd,2=Even,3=Mark,4=Space',0 Align 4 SSZ1039ABE8_StopBit: db 'StopBit',0 SSZ1039ABF0_The_number_of_stop_bits_to_be_us: db 'The number of stop bits to be used 0=1,1=1.5,2=2',0 Align 4 SSZ1039AC24_Baud: db 'Baud',0 db 00h; db 00h; db 00h; db 00h; db 00h; db 00h; db 00h; SSZ1039AC30_The_baud_rate_at_which_the_conne: db 'The baud rate at which the connected device operates in bps (default 9600)',0 Align 4 SSZ1039AC7C_The_COM_port_number__1_COM1_2_CO: db 'The COM port number (1=COM1,2=COM2 etc.)',0 Align 4 SSZ1039ACA8_COM_Port: db 'COM Port',0 Align 4 SSZ1039ACB4_JoyY: db 'JoyY',0 Align 4 SSZ1039ACBC_The_joystick_Y_position___1_to_1: db 'The joystick Y position (-1 to 1)',0 Align 4 SSZ1039ACE0_JoyX: db 'JoyX',0 Align 4 SSZ1039ACE8_The_joystick_X_position___1_to_1: db 'The joystick X position (-1 to 1)',0 Align 4 SSZ1039AD0C_Whether_the_Z_button_is_pressed: db 'Whether the Z button is pressed',0 L1039AD2C: db 43h; 'C' db 00h; db 00h; db 00h; SSZ1039AD30_Whether_the_C_button_is_pressed: db 'Whether the C button is pressed',0 SSZ1039AD50_WiiNunchuk: db 'WiiNunchuk',0 Align 4 SSZ1039AD5C_Y_position_of_dot4__0_1_: db 'Y position of dot4 (0-1)',0 Align 4 SSZ1039AD78_X_position_of_dot4__0_1_: db 'X position of dot4 (0-1)',0 Align 4 SSZ1039AD94_Whether_dot_4_is_visible: db 'Whether dot 4 is visible',0 Align 4 SSZ1039ADB0_Dot4: db 'Dot4',0 Align 4 SSZ1039ADB8_Y_position_of_dot3__0_1_: db 'Y position of dot3 (0-1)',0 Align 4 SSZ1039ADD4_X_position_of_dot3__0_1_: db 'X position of dot3 (0-1)',0 Align 4 SSZ1039ADF0_Whether_dot_3_is_visible: db 'Whether dot 3 is visible',0 Align 4 SSZ1039AE0C_Dot3: db 'Dot3',0 Align 4 SSZ1039AE14_Y_position_of_dot2__0_1_: db 'Y position of dot2 (0-1)',0 Align 4 SSZ1039AE30_X_position_of_dot2__0_1_: db 'X position of dot2 (0-1)',0 Align 4 SSZ1039AE4C_Whether_dot_2_is_visible: db 'Whether dot 2 is visible',0 Align 4 SSZ1039AE68_Dot2: db 'Dot2',0 Align 4 SSZ1039AE70_Y_position_of_dot1__0_1_: db 'Y position of dot1 (0-1)',0 Align 4 SSZ1039AE8C_X_position_of_dot1__0_1_: db 'X position of dot1 (0-1)',0 Align 4 SSZ1039AEA8_Whether_dot_1_is_visible: db 'Whether dot 1 is visible',0 Align 4 SSZ1039AEC4_Dot1: db 'Dot1',0 Align 4 SSZ1039AECC_Reference_to_wiimote_from_a_Wiim: db 'Reference to wiimote from a Wiimote component',0 Align 4 SSZ1039AEFC_WiimoteIR: db 'WiimoteIR',0 Align 4 SSZ1039AF08_For_connecting_IR_and_Nunchuck_c: db 'For connecting IR and Nunchuck components',0 Align 4 SSZ1039AF34_AccelZ: db 'AccelZ',0 Align 4 SSZ1039AF3C_Raw_accelerometer_z_axis: db 'Raw accelerometer z-axis',0 Align 4 SSZ1039AF58_AccelY: db 'AccelY',0 Align 4 SSZ1039AF60_Raw_accelerometer_y_axis: db 'Raw accelerometer y-axis',0 Align 4 SSZ1039AF7C_AccelX: db 'AccelX',0 Align 4 SSZ1039AF84_Raw_accelerometer_x_axis: db 'Raw accelerometer x-axis',0 Align 4 SSZ1039AFA0_The_roll_angle___90_to_90_deg_: db 'The roll angle (-90 to 90 deg)',0 Align 4 SSZ1039AFC0_The_pitch_angle___90_to_90_deg_: db 'The pitch angle (-90 to 90 deg)',0 SSZ1039AFE0_Button_2: db 'Button 2',0 Align 4 SSZ1039AFEC_Button_1: db 'Button 1',0 Align 4 SSZ1039AFF8_Home: db 'Home',0 Align 4 SSZ1039B000_Button_Home: db 'Button Home',0 L1039B00C: db 2Bh; '+' db 00h; db 00h; db 00h; SSZ1039B010_Button_Plus: db 'Button Plus',0 SSZ1039B01C_Button_Minus: db 'Button Minus',0 SSZ1039BB98_Index_of_the_LED_you_want_to_con: db 'Index of the LED you want to control (0-63)',0 SSZ1039BBC4_PhLED:

theres a WHOLE lot more!

it seems that references to ALL of FS' prims are here! I dont know why maybe its because the the exported vst "shell" needs to know where they all are in case you use them. so your "code" gets placed in this shell??? I dunno, its interesting tho

by **Jay** » Sun Jun 09, 2013 11:25 pm

i don't even know what I'm looking at in a hex editor lol

RJH they need to extract your code with tools and know and be able to read and understand the code then sometimes change it and recompile it and in other instances they somehow get key/serial info and make a keygen that your protection system happily accepts, they often make patches that remove demo protections and the cracks sometimes change windows files to prevent internet checks or plant fake permissions into the reg, sometimes all of them! a huge array of ways but they need to be able to read the code first!!

I used to think "why don't they make cool stuff if they are so leet" and quickly found out that many of them do whilst some are quite young geek types,upcoming!, and are highly skilled programmers! the original reverse engineering clans were born out of the Demo scene, and they did not spread the software about, there was no internet ha ha! file sharing is doomed now anyway so the cracking will still go on but it will go back underground and it will get better for the developer!

would it not be simple enough to make a timebomb system in ruby? hee hee for Trogg and Myco!

what parameters would be required to set it off and disable the app? I made simple timeout and noise modules back on SM, but that was just for demo time limiting done in green, run for a period of time and then shut off or introduce noize into the output!

a timebomb normally needs to know by making some sort of delayed check to see if the software was altered or a serial or license had not been issued or was a duplicate of a customers one, not on a authorized machine from hardware info or some thing that alerts it to activate the bomb!

I am not saying either that software should not look good, what i meant is there is such an array of very capable, excellent sounding and looking freeware available so to attract the people who you want to buy it, musicians, producers, etc it needs to really do more than look nicer or have a better layout (which is opinion anyway) i am talking functionality, quality of sound, unique features or ease of quality results, flexibility etc, something to make the customer, say, a creative who is purchasing a new tool, actually want your software!

regards

by **Jay** » Sun Jun 09, 2013 11:34 pm

lol i was just reading that ripped info, there are some strange references in that eh! is it secret Malc speak? :lol:

by **RJHollins** » Mon Jun 10, 2013 2:44 am

Looked up the PE Explorer app ... cost is $129

So, the question B ... can we see enough with the demo ... or ... anybody know of a similar free one

thx

by **Jay** » Mon Jun 10, 2013 3:54 am

there are a ton of tools available for disassembling and lots of free ones, think some of the best ones are underground tools made by reverse engineering types! you can find some on black hat sites!

here is a freeware one similar to PE explorer! http://www.ntcore.com/exsuite.php

I'm sure i have seen it said before that all the primitives are wrapped into every export from SM/FS even hidden unfinished ones not available to us, donno maybe I'm wrong!

what are you looking for anyway?

Time limits for demo's

Re: Time limits for demo's

Re: Time limits for demo's

Re: Time limits for demo's

Re: Time limits for demo's

Re: Time limits for demo's

Re: Time limits for demo's

Re: Time limits for demo's

Re: Time limits for demo's

Re: Time limits for demo's

Re: Time limits for demo's

Who is online